中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/Z 17626.33-2023 电磁兼容 试验和测量技术 第33部分:高功率瞬态参数测量方法(中英文版) Electromagnetic compatibility - Testing and measurement techniques - Part 33: Measurement methods for high power transient parameters |
|||
GB/T 21838.3-2022 金属材料 硬度和材料参数的仪器化压入试验 第3部分:标准块的标定(中英文版) Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 3: Calibration of standard blocks |
|||
GB/T 21838.2-2022 金属材料 硬度和材料参数的仪器化压入试验 第2部分:试验机的检验和校准(中英文版) Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 2: Verification and calibration of testing machines |
|||
GB/T 16850.1-2022 光放大器试验方法 第1部分:单波道光放大器功率和增益参数(中英文版) Test methods for optical amplifiers - Part 1: Power and gain parameters of single-channel optical amplifiers |
|||
YY/T 0651.3—2020 外科植入物 全髋关节假体的磨损 第3部分:轨道轴承型磨损试验机的载荷和位移参数及相关的试验环境条件(中英文版) Surgical implants Wear of total hip prostheses - Part 3: Load and displacement parameters of orbital bearing type wear testing machines and associated test environmental conditions |
|||
GB/T 21838.4-2020 金属材料 硬度和材料参数的仪器化压入试验 第4部分:金属和非金属覆盖层的试验方法(中英文版) Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings |
|||
GB/T 21838.1-2019 金属材料 硬度和材料参数的仪器化压入试验 第1部分:试验方法(中英文版) Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method |
|||
GB/Z 37754-2019 关于确定不超过2mm距离的电气间隙和爬电距离的指南 对影响参数进行研究的试验结果(中英文版) Guidance on clearances and creepage distances in particular for distances equal to or less than 2mm—Test results of research on influencing parameters |
|||
GB/T 36261-2018 建筑用节能玻璃光学及热工参数现场测量技术条件与计算方法(中英文版) On-site test technical condition and calculation for optical and thermal parameters of energy saving glass for building |
|||
GB/T 34089-2017 VHF/UHF无线电监测测向系统开场测试参数和测试方法(中英文版) Test parameters and test methods for VHF/UHF frequency band radio monitoring and direction finding system in OATS |
|||
GB/T 32608-2016 羽毛球拍及部件的物理参数和试验方法(中英文版) The physical parameters and test methods of badminton racket and parts |
|||
GB/T 32609-2016 网球拍及部件的物理参数和试验方法(中英文版) The physical parameters and test methods of tennis rackets and parts |
|||
YD/T 3046-2016 移动核心网设备节能参数和测试方法(中英文版) (Mobile core network equipment energy efficiency parameters and test methods) |
|||
YD/T 3047-2016 移动通信设备节能参数和测试方法 基站控制器(中英文版) (The mobile communication device parameters and test methods for saving the base station controller) |
|||
YY/T 0651.1-2016 外科植入物全髋关节假体的磨损 第1部分:磨损试验机的载荷和位移参数及相关的试验环境条件(中英文版) (Wear surgical implants - Part 1 total hip prosthesis: load and displacement parameters for wear testing machine and related environmental conditions for test) |
|||
YY/T 1426.1-2016 外科植入物全膝关节假体的磨损 第1部分:载荷控制的磨损试验机的载荷和位移参数及相关的试验环境条件(中英文版) (Wear surgical implants for total knee prosthesis - Part 1: Load and displacement parameters for wear testing machine load control and related environmental conditions for test) |
|||
YD/T 3014-2016 基于公用电信网的宽带客户网关节能参数和测试方法(中英文版) (Based on public telecommunication broadband customers gateways saving parameters and test methods) |
|||
YD/T 2953-2015 接入设备节能参数和测试方法 gpon系统(中英文版) (Access to energy-saving equipment GPON system parameters and test methods) |
|||
YD/T 2954-2015 接入设备节能参数和测试方法 vdsl2系统(中英文版) (Access to energy-saving equipment parameters and test methods VDSL2 system) |
|||
YD/T 2952-2015 接入设备节能参数和测试方法 epon系统(中英文版) (Access to energy-saving equipment EPON system parameters and test methods) |
找到:49條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |